Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Zanussi ZWP 582
Summary of Contents for Zanussi ZWP 582
- Page 1 User manual Washing Machine ZWP 582 ZWQ 5104 ZWQ 5105...
-
Page 2: Table Of Contents
Contents Safety information _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 2 Operating Problems _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 8 Product description _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 3 Detergents and Additives _ _ _ _ _ _ _ _ _ _ _ _ _ _ 9 First use _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 4... -
Page 3: Product Description
• Empty pockets and unfold items. • This appliance is not intended for use by persons (in- • Your appliance is intended for normal domestic use. cluding children) with reduced physical, sensory or Do not use the appliance for commercial or industrial mental capabilities, or lack of experience and knowl- purposes or for any other purpose. -
Page 4: First Use
Lights of cycle progress OPTIONS button START/PAUSE button SPIN button EXTRA RINSE button Dispenser box Prewash Wash Softener (do not fill above the MAX symbol First use • Ensure the electrical and water connections com- • Run an initial wash cycle at 90 °C, without any ply with the installation instructions. - Page 5 At the end of the programme, if you have selected “Rinse The lid will be locked during the delayed start time. If you hold” , you then need to select a “ Spin ” or “ Drain ” need to open it, you must first pause the appliance by programme to finish the cycle and empty the water.
-
Page 6: Washing Programmes
Extra rinse, Delay start en, towels. Max. spin speed: 850 rpm for model ZWP 582/ 1000 rpm for model ZWQ 5104, ZWQ 5105 Cotton Eco (40° and 60°) : White or colour, e.g. nor-... -
Page 7: Care And Cleaning
Max. spin speed: 850 rpm for model ZWP 582/ 1000 rpm for model ZWQ 5104, ZWQ 5105 Drain : Runs an empty cycle after a Rinse hold option. 6 kg Spin : A spin cycle to 850 rpm for model ZWP 582/ 6 kg Delay start 1000 rpm for model ZWQ 5104, ZWQ 5105 after a Rinse hold option. -
Page 8: Operating Problems
Operating Problems Numerous checks were carried out on your appliance be- function, please refer to the sections below before contact- fore it left the factory. However, should you notice a mal- ing the after-sales service. Problems Causes The appliance doesn’t start or •... -
Page 9: Detergents And Additives
Problems Causes The appliance vibrates, is • all packaging have not been removed from the appliance (see “Installation”), noisy: • the appliance isn’t level and is unbalanced (see “Installation”), • the appliance is too close to the wall or furniture, •... -
Page 10: Technical Data
Water supply Maximum Load Cotton 6 kg Spin Speed Maximum 850 rpm (ZWP 582) 1000 rpm (ZWQ 5104, ZWQ 5105) 1) Connect the water inlet hose to a water tap with a 3/4'' thread. Consumption values Programme Energy consumption Water consumption... - Page 11 The appliance can also be damaged through physical con- Keep the transit bolts for To install the appliance at tact. when you move the appli- the same level as neigh- Unpacking ance. boring furniture, cut these plastic pieces. Water supply In case of necessity move Open the water inlet tap.
-
Page 12: Environment Concerns
contact with the wall or other furniture. Accurate levelling avoids vibrations, noise and prevents the appliance from moving when running. Environment concerns at your local council) for collection and recycling. When The symbol on the product or on its packaging disposing of your appliance, remove all parts which could indicates that this product may not be treated as be dangerous to others: cut off the power supply cable at... - Page 16 www.zanussi.com/shop...