Repairing common server problems
Clicking Fix can repair several common problems that occur in the LDD system.
The Fix button does each of the following as necessary:
•
Sets all servers online
•
Runs a discovery for the associated device group
•
Updates policies on associated printers
•
Reloads the license files on the server system
Any printers that are powered off when using the Fix button are placed in the "Not Communicating" category. To
recover communication with a printer in the "Not Communicating" category, turn on the printer, and then click
Fix again.
Adding printers to the server
Adding a printer using the Solution Status Page adds the printer to the device group associated with the solution
and runs a discovery to initiate communication with the printer. Each printer added uses one of the available licenses
on the server.
1
Make sure the printer or printers being added are turned on.
2
In the right pane of the Solution Status Page, click Add.
Note: The Add button is available only if the server has unused licenses.
Monitoring and maintaining the system
69