Lexmark C792 Administrator's Manual page 19

Category
Network speed
Network name resolution
Static addressing
Note: The database requires the most system resources and disk I/O and therefore should be installed on the fastest
hardware with the fastest disk I/O infrastructure available. Second in resource usage is the load balancer.
Computers where Lexmark Management Console is accessed
Category Requirement
Browser Internet Explorer 7.0 or later, or Mozilla Firefox 2.0 or later, with Adobe Flash Player v10 or later and cookies
allowed for the address where LMC is accessed
Video Capable of displaying 1024x768 or higher resolution
Virtual machine where components are installed
Category
Virtual machine monitor
Note: We do not recommend installing the database on a virtual machine.
Requirement
100Mbps network
Note: Network speed affects the time
required to perform a solution, and
speed requirements depend on each
solution. Solutions that require
intensive processing and more
network traffic may require Gigabit
Ethernet to run at a satisfactory speed.
Domain Name System (DNS) or Windows
Internet Name Service (WINS)
Notes:
•
Local hosts files can be used
instead of external DNS.
•
Contact Lexmark Professional
Services for support of other
network systems.
•
The database must have a static IP
address if it is installed on a cluster.
•
The load balancer must have a static
IP address if:
–
It is installed on a cluster.
–
Any e-Task printers are used
with the system.
–
Any printers used with the
system do not have a DNS server
configured.
Installing Lexmark Document Distributor
19
Recommended for enterprise
systems
Gigabit Ethernet using dual-port
network adapters
Static IP addresses are recommended
for all system components and any
e-Task printers used with the system.
Requirement
VMware ESX 3.0.1 or later