Troubleshooting
Viewing logs
Viewing installation logs
When the cause of an installation problem is not obvious, you can view the logs that are created during installation
to help determine the cause of the problem, and they may help Lexmark Customer Support in assisting to solve your
problem.
Click Start Run.
1
2
Type "%ALLUSERSPROFILE%\Lexmark\LDD4x", and then click OK.
3
Open any of the following log files in a text editor, or send them to Customer Support as necessary:
•
ldd_InstallUninstall.log
•
ldd_installhelper.log
•
LxProxy.log
•
AbbyyMsiLog.txt
Additionally, other logs may be available, depending on the steps taken during installation. Other files that have
names beginning with "ldd" are also logs related to installation processes.
Viewing the server log
All server activity at the selected message priority is recorded in the file lsas.log in the folder Lexmark\Solutions
\tomcat\logs where the server was installed. Open the file in a text editor to view the log.
The default message severity for recording is warn. When troubleshooting a problem, the message priority can be
changed to debug to capture all available messages:
1
In a text editor, open the file log4j.xml from the folder Lexmark\Solutions\apps\wf-ldss\WEB-INF\classes where
the server was installed.
2
In the following lines, change "warn" to "debug":
<!-- Root Logger. -->
<root>
<priority value="warn" />
3
Save and close the file.
4
On the System tab of LMC, set the server for which you are changing the message priority offline. Make sure the
server is offline before proceeding. Click Refresh, and then make sure offline is reported in the Status column
for the server.
5
From the Windows Services control panel on the server computer, restart the Lexmark Solutions Application
Server service.
6
On the System tab of LMC, set the server online.
Note: After recording the necessary data, the message priority should be changed back to warn to save disk space.
Troubleshooting
120