Lexmark C792 Administrator's Manual page 117

4
To create the folder specified by File Path and Name if it does not already exist, select Create
Directory.
5
Click OK.
•
Print:
1
Type the name of the Output Printer Queue where jobs should be printed. This name must match the
name of a printer in the Printers folder on each server computer. (When multiple servers are used, the
same print queue should be installed with the same name on each server.)
2
Type the number of physical copies to print for each print job that is processed by the forms printer.
3
Select the desired settings for Duplex, Paper Type, Paper Size, and Orientation.
4
Select the appropriate printer type for your output printer:
Printer type
Lexmark PCL
Lexmark Postscript
Lexmark Printer with PDF
support
Lexmark Printer with PDF
and Page Formatting
Note: For more information about the type of data supported by your printer, refer to the printer
documentation.
5
Click OK.
8
If you want to run a script when a user submits a job, select a Script from the list.
Note: If you do not want to run a script, select None beside Script.
9
If a particular type of input data is expected, select an appropriate Datatype filter to remove commands and data
that are not needed by LDD. If you do not want to filter input data, select None.
10
Click Finish.
Description
Sends jobs using PCL data
Sends jobs using PostScript
with PJL commands
Sends jobs using
unformatted PDF data and
PJL commands
Sends jobs using formatted
PDF data
Working with forms
117
Printer support
All models, including those
without PostScript support
Most models
Specific models
Specific models
Relative speed
Slow
Slow
Faster
Fastest