•
To associate the script with a software client group:
a
Click SftClientGroup, and then click Next.
b
Select the software client group with which the script should be associated, and then click Next.
•
To schedule the script without associating it with a device group or software client group, click None, and
then click Next.
A script that is not associated with a device group or software client group can access only global solution
settings.
7
Select a Solution, and then select a Script.
8
If the script applies to individual servers rather than the system as a whole, such as a script that deletes certain
files from a server, or a script that runs a report with server-specific information, click Run on All Servers.
9
If the script uses information supplied in the Additional Options field, type the necessary information. For more
information, contact the developer of the solution.
10
Click Next.
11
Enter a start date, and then type the start time.
12
Configure the frequency of the scheduled event, and then click Finish.
Testing and using Lexmark Document Distributor solutions
114