Table of Contents
Advertisement
English
Cleaning the Print Head
When printing becomes faint or uneven although the INK OUT LED is not
lit or flashing, press the CLEANING button for more than three seconds to
run print head cleaning. During the cleaning process, the POWER LED
keeps flashing. When the cleaning process ends, the printer is ready for
printing.
Note:
Press the CLEANING button only when there is a problem with the printing
quality. The cleaning process uses some ink, so you do not want to run it
unnecessarily.
Do not turn off the printer or open any covers while the POWER LED is
flashing.
Ink Cartridge Life
To make your ink cartridges last as long as possible:
❏
Do not remove an ink cartridge except when replacing it or
transporting the printer.
❏
Do not turn on or off the printer unnecessarily.
❏
Do not press the CLEANING button unless printing is faint or uneven.
Inserting and Replacing Roll Paper
CAUTION:
Be sure to use roll paper that meets the specifications. (See the
specifications on page 22 of this manual for more details.)
To avoid injuries and/or machine failure, make sure not to touch
anything other than the roll paper when the roll paper cover is open.
Note:
Do not use paper rolls that have the paper glued or taped to the core. They may
cause paper jams.
To prevent paper jams, make sure that nothing obstructs the paper coming out of
the paper outlet and do not pull the paper being ejected.
Do not open the roll paper cover during printing or paper feeding.
1.
Turn on the printer power.
2.
Press the roll paper cover open button, and open the roll paper cover.
3.
If a roll paper core is inside the printer, remove it.
4.
Install a new paper roll.
12 TM-J9000/J9100
Advertisement
Table of Contents
