English
Purpose of This Manual
This manual describes basic operations for operators of the single color
(black ink) TM-J9000 printer, and the two color (black and red/green/
blue) TM-J9100 printer to enable safe and correct use of the printer.
Part Names
Roll paper section
Feeder
Roll paper cover
open button
Cartridge cover tab
Power supply connector
Note:
DIP Switch 2 is intended for switching the interface. Do not change the position
of the DIP switch 2 except when changing the interface.
Hooking the USB cable on the locking wire saddle prevents the cable from
falling off.
Unpacking
The following items are included for the standard specification printer. If
any item is damaged, contact your dealer.
❏
Printer
❏
Ink cartridge
❏
Power switch cover
❏
Instruction sheet
❏
Pocket (only for the ASF model)
4 TM-J9000/J9100
Validation section
Locking wire saddle
USB connector
DIP switch 2
❏ Roll paper
❏ User's Manual (this manual)
❏ Feeder guide
❏ Ink cartridge manual
Scanner
Control panel
Card entrance
Power switch