Table of Contents
Advertisement
English
INK OUT LED
❏
Flashes when the ink is almost out. (You can continue printing.)
❏
Comes on when no ink cartridge is installed or the ink is out. (The
printer goes off line, and the ERROR LED comes on.)
Note:
The TM-J9000 has an INK OUT LED for BLACK only, whereas the TM-J9100
has LEDs for both BLACK and COLOR.
PAPER OUT LED
Comes on when the roll paper is out or almost out.
VALIDATION/FEEDER LED
❏
Comes on when the printer is ready to process checks.
❏
Flashes when the printer is waiting for check insertion or removal.
ID CARD LED
❏
Comes on when the printer is ready to process ID cards.
❏
Flashes when the printer is waiting for card insertion or removal.
CLEANING Button
When printing becomes faint or uneven, press this button for more than
three seconds. The printing section inside the printer will be cleaned
automatically, and the printing will be back to normal.
Note:
Press this button for more than three seconds only when the INK OUT LED is
not lit or flashing.
Pressing the CLEANING button unecessarily leads to a waste of ink.
FEED Button
Press this button to feed the roll paper.
Power Switch and Power Switch Cover
Press the power switch to turn on or off the printer.
Note:
Never open a cover or turn off the printer while the POWER LED is flashing.
8 TM-J9000/J9100
Advertisement
Table of Contents
