Ricoh 3035 - Aficio B/W Laser General Settings Manual page 131

Problem
Original images are print-
ed on the reverse side of
the paper.
Misfeeds occur frequently.
An error message remains,
even if misfed paper is re-
moved.
Cannot print in duplex
mode.
Causes
You may have loaded the
paper incorrectly.
The tray's side guides may
not be locked.
The tray's end guide may
not be set properly.
You may have loaded pa-
per of a size not shown on
the paper size selector.
When a misfeed message
appears, it remains until
you open and close the cov-
er, as required.
You cannot use paper in
the bypass tray for duplex
printing.
[1 Sided Copy] is selected for
Paper Type: Tray 1-4.
If Your Machine Does Not Operate As You Want
Solutions
Load paper correctly. Load paper
into Tray 1-4 with the print side up,
and into the LCT or bypass tray
with the print side down. See p.123
"Orientation-Fixed Paper or Two-
Sided Paper".
Check the side guides are locked.
p.136 "Changing the Paper Size".
Check the end guide is set properly.
See p.136 "Changing the Paper
Size".
When using paper of a size that can-
not be detected automatically, use
Tray Paper Settings to set the paper
size. See p.59 "Tray Paper Size: Tray
1–4" and p.174 "Copy Paper".
Clear misfed paper, and then open
and close the front cover. See p.127
"x Clearing Misfeeds".
For duplex printing, select Tray 1-4
in copier mode or with the printer
driver.
Select [2 Sided Copy] for Paper Type:
Tray 1-4. See p.60 "Paper Type: Tray
1–4"
6
119