The Back Panel - TP-Link TD-VG3631 User Manual

1.3.2

The Back Panel

The Router's ports, where the cables are connected, and RESET button are located on the front
POWER: The Power plug is where you will connect the power adapter.
USB1/USB2: The USB port connects to a USB storage device or a USB printer.
PHONE2/PHONE1:The phone port connects to a phone set.
LAN1, LAN2, LAN3, LAN4/WAN: Through these ports, you can connect the Router to your
PC or the other Ethernet network devices. Enable EWAN function and you will be able to
connect to Cable/FTTH/VDSL/ADSL device.
LINE: Connect this port to PSTN phone cable. Or you can connect them by an external
separate splitter. For details, please refer to
ADSL: Through the port, you can connect the Modem Router with the telephone. Or you can
connect them by an external separate splitter. For details, please refer to
Router.
Antennas: Used for wireless operation and data transmit.
RESET: There are two ways to reset the Router's factory defaults.
Method one: With the Router powered on, use a pin to press and hold the Reset button for at
least 5 seconds. And the Router will reboot to its factory default settings.
Method two: Restore the default setting from "Maintenance-SysRestart" of the Router's
Web-based Utility.
Ports and buttons on the left side
150Mbps Wireless AP/Client Router User Guide
Figure 1-2
2.3 Connecting the
6
Router.
2.3 Connecting the