TP-Link TD-VG3631 User Manual page 76

Enable Local Play Operation Notify: Check this box so there will be sound indication for
operation when you listen to the voice messages. This is enabled by default. If you are very
familiar with the operations, you can disable it.
Enable Global Wav Format: Check this box and all the voice message will be saved as wav
files in your USB device. It is convenient for users to listen to the voice messages on the
computer. Considering the capacity of your USB device, it is disabled by default.
Enable Remove Expired Voice: Check this box and then the expired voice messages will be
deleted automatically. Considering the capacity of USB device, it is enabled by default.
Expired Days(7~15): Configure the days that you want the voice messages to be kept.
Voice Duration Limit(20~120s): This option is used to limit the duration of a voice message.
USB MailBox Capacity: Set the capacity for the USB mailbox. Please note that the capacity
set should be less than that of the USB device.
Phone Enable: Check the box to enable this function.
Phone Mode: If no answer is selected, voice notification will be played when there is no
answer. If unconditionally is selected, all incoming calls will be directed to voice mail.
Customize Voice Notify For Record: Check the box to enable voice notification
customization. To record your own voice notification, press "*30" after picking up your phone
set.
Voice Notify For Record: Select to use the default or customized voice notification.
Remote Access PIN: This PIN code is used to listen to the voice messages in a remote place.
Operations are as follows.
1) Call the local phone and wait for the voice notification.
2) Press "*" before the notification is over.
150Mbps Wireless AP/Client Router User Guide
Figure 4-55
67