TP-Link TD-VG3631 User Manual page 65

Destination: Both SIP account and PSTN can be selected here. As to which one will be
finally used, it depends on not only Destination selected here but also Dial Plan Priority
configured on Phone Setup
should first add one on
Max Length: Specify the max length of numbers you wish to dial out. The length of the
actual dialed number can not exceed the length set here. For example, if the length is set to
"6", when you dial "7654321", only "765432" will be sent out.
Dial End With: Ways of indicating when the dialing is finished.
If "TimeOut" is selected, the dialing will be sent out when timeout starts. The timeout activates
when no more digits are dialed in a specific duration;
If "#" is selected, the dialing will not be sent until "#" is dialed;
If "#/TimeOut" is selected, the dialing will be sent out when timeout starts or "#" is dialed;
If "None" is selected, the dialing will not be sent out unless the length of number you dial
meets the Max Length.
Operate: Specify a dialing method to make call(s).
•
Strip Prefix – If it is selected, the original phone number will be sent out with the prefix
deleted; you can limit the strip length by entering digits in "Strip Length" field.
st
Take the 1 dial plan in Figure 4-38 as an example. If you dial 12340000, number 40000
will be dialed out to make a call.
•
Replace Prefix – If it is selected, the original phone number will be sent out with the prefix
replaced by what you set in the "Replace With" field.
nd
Take the 2
18655556666 will be dialed out to make a call.
•
Add Number – If it is selected, the original phone number will be sent out with what you
set in "Add Number" field added ahead.
rd
Take the 3 dial plan in Figure 4-38 as an example. If you dial 018655556666, number
1795101865555666 will be dialed out to make a call.
Interface Enable: You can check any box to enable interface(s). Numbers matching prefix in
DIal Plan List can only be dialed out through the selected interface(s).
4.7.2.2 Forbidden Call
Choose "Voice" "Dial Plan"
Forbidden Call makes it possible for administrators to control user's access to the voice service.
Prefix: Displays the prefix of your plan. This prefix refers to the initial digit(s) of the numbers
page. Please note that if you want to select a SIP account, you
SIP Account page; otherwise only NONE is available.
dial plan in Figure 4-38 as an example. If you dial 186666, number
"Forbidden Call", you will see the screen similar to Figure 4-39.
Figure 4-39
150Mbps Wireless AP/Client Router User Guide
56