Replacing The Vga Board (For Discrete Models) - Packard Bell EasyNote DT85 Service Manual

Replacing the VGA board (for discrete
models)
www.packardbell.com
Tools you need to complete this task:
Flat-blade driver
Phillips #0 screwdriver
Screws removed during this task:
•
2 black M2×4 (VGA board)
To replace the VGA board (for discrete models):
1
Complete the steps in
2
Complete the steps in
3
Remove the thermal module by following the instructions in
thermal module" on page
4
Remove the VGA board screws.
- OR -
"Preparing the notebook" on page
"Removing the bay cover" on page
70.
Scribe or non-marring tool
51.
55.
"Replacing the
75