Table of Contents
Advertisement
www.packardbell.com
17
Connect the LCD cable to the connector on the new LCD panel and replace
the tapes that might be destroyed when removing the LCD cable.
18
Turn the LCD on its back and secure the left and right LCD bracket with
that screws that were removed in
19
Place the new LCD on the LCD assembly lid and replace the tape remove
in
step
10.
20
Secure the LCD on the LCD assembly lid by replacing the screws that were
remove in
step
21
Reconnect the webcam cable.
22
Replace the inverter board by following the instructions in
inverter board" on page
23
Replace the LCD front panel by following the instructions in
LCD front panel" on page 116.
24
Reinstall the LCD panel assembly by following the instructions in
the LCD panel assembly" on page
25
Reinstall the keyboard cover by following the instructions in
keyboard cover"
26
Reinstall the keyboard by following the instructions in
keyboard" on page
27
If you have disconnected any wireless antennas, reconnect them now.
28
Replace the bay cover, then tighten the cover screws.
29
Reinstall the battery.
step
9.
119.
83.
procedure on
page
77.
12.
79.
"Replacing the
"Replacing the
"Replacing the
"Replacing
"Replacing the
125
Advertisement
Table of Contents
