Too Many Bins Attached; Too Many Disks Installed - Lexmark 20T3751 - T 620dn B/W Laser Printer User Reference Manual

What you can do:
•
Press to clear the message. The printer discards any data received through the serial port.
Go
•
Make sure the Serial Buffer menu item in the Serial Menu is not set to Disabled.
56 Parallel
Port <x> Disabled
What this message means:
Data has been sent to the printer through a parallel port, but the parallel port is disabled.
What you can do:
•
Press to clear the message. The printer discards any data received through the parallel
Go
port.
•
Make sure the Parallel Buffer menu item in the Parallel Menu is not set to Disabled.
58 Too Many
Bins Attached
What this message means:
•
Too many output bins are installed on the printer.
•
An unsupported configuration of output bins is installed on the printer.
What you can do:
Turn off and unplug the printer. Remove or reconfigure the output bins. Plug in the printer and
turn it on.
58 Too Many
Disks Installed
What this message means:
Too many hard disks are installed on the printer. The printer only supports one hard disk at a
time.
What you can do:
Turn off and unplug the printer. Remove the excess hard disks from the printer. Plug in the
printer and turn it on.
56 Std Parallel
Port Disabled
132