Table of Contents
Advertisement
Orientation
Purpose:
To determine how text and graphics are oriented on the page.
Values:
Portrait*
Landscape
Pitch
Purpose:
To specify the font pitch for scalable monospaced fonts.
Values:
0.08...100 (in increments of 0.01 cpi)
10*
Pitch refers to the number of fixed-space characters in a horizontal inch of type. You can select a pitch
from 0.08 to 100 characters per inch (cpi) in increments of 0.01 cpi. For nonscalable monospaced
fonts, the pitch is displayed, but cannot be changed.
Note: Pitch is only displayed for fixed, or monospaced, fonts.
Point Size
Purpose:
To change the point size for scalable typographic fonts.
Values:
1...1008 (in increments of 0.25 points)
12*
Point size refers to the height of the characters in the font. One point equals approximately
1/72 of an inch. You can select point sizes from 1 to 1008 in increments of 0.25 points.
Note: Point Size is only displayed for typographic fonts.
Prints text and graphics parallel to the short edge of the paper.
Prints text and graphics parallel to the long edge of the paper.
169
Advertisement
Table of Contents
