What you can do:
•
Send a job to print.
•
Press
to quickly warm the printer to normal operating temperature and display the Ready
Go
message.
Note: This message does not appear on the T620 printer.
See also:
Power Saver
Priming Failed.
Retry?
What this message means:
The printer failed to prepare the stapler to staple print jobs.
What you can do:
•
Press
to try priming the stapler again.
Go
•
Make sure staples are loaded and there is no jam in the stapler.
•
Make sure paper is loaded in the tray specified in the Staple Prime Source menu item.
•
Press
or
Return
Priming Stapler
What this message means:
The printer is preparing the stapler to staple print jobs. The printer tests the stapler several
times before returning to the Ready state.
What you can do:
Wait for the message to clear.
Print Jobs on
Disk. Go/Stop?
What this message means:
Jobs that were spooled to the hard disk before the printer was last turned off have not yet
printed.
What you can do:
(Setup Menu)
to cancel priming.
Stop
117