Printer Setup - Dell 2330d - Laser Printer B/W Service Manual

Printer setup

Printer Setup displays the following selections:
•
•
•
•
•
•
•
•
•
Defaults
The value of this setting determines whether the printer uses the U.S. or Non-U.S. factory default value for the
settings listed below:
If the value of a setting is changed, then Submitting Changes... displays. Press
and return to the Printer Setup menu.
Printed Page Count (Page Count)
The value of this setting gauges the amount of usage on the printer. The Page Count setting's value will equal
the values of the Picked Sides meter. After all print tests have been completed, the value will reset to "0."
Note: The value of this setting cannot be changed manually.
Press to exit the Page Count setting and return to the Printer Setup menu.
Permanent Page Count (Perm Page Count)
The value of this setting indicates the total number of pages that have been printed. After all print tests have
been completed, the value will reset to "0."
Note: The Permanent Page Count's value cannot be reset.
Press to exit the Permanent Page Count and return to the Printer Setup menu.
Serial Number
The serial number can only be viewed and cannot be changed.
To view the serial number:
1.
Select Serial number from PRINTER SETUP.
2.
Press Return to return to PRINTER SETUP.
3-12
Defaults (U.S.*, Non-U.S.)
Page Count
Perm Page Count
Serial Number
Engine Setting (1 through 4)
Model Name
Configuration ID
Edge to Edge
Par S Strobe Adj (only displayed if the printer has a standard parallel port)
Device Setting
Paper sizes
Envelope size
PCL Symbol Set
PPDS Code Page
Universal Units of Measure
U.S. value Non-U.S. value
Letter A4
10 DL Envelope
PC-8 PC-850
437 850
Inches Millimeters
to exit the Defaults setting