Table of Contents
Advertisement
Note: Avoid using the DOS Print command to send a
Printing from non-Windows DOS
applications
Follow these steps if your application runs from the
native DOS prompt, but does not run from the DOS
prompt in Windows.
1
2
3
4
5
– copy is the DOS copy command.
– filename is the name of the print file you cre-
ated.
– lptn is the port where your printer is connected.
For example, lpt1 or lpt2.
– /b instructs the computer to send the data in
binary form.
job to the printer port. The Print command causes
printing delays.
From Windows, open the printer's
Program.
For help opening the Control Program, see
"Opening the Control Program" on page 8.
Click the
Options
Tab.
Make sure Disable CJ5700 DOS Printing (Enable
DOS Printing to other Printers) is not checked.
Exit Windows.
Start your DOS application.
Control
Printing from DOS
39
Advertisement
Table of Contents
