Linkbuilder Fms Tr Stackable Token Ring Hubs - 3Com 3C16670 - LinkBuilder FMS II Hub Configuration Manual

Configuration guide
Table of Contents

Advertisement

LinkBuilder FMS TR
LinkBuilder FMS TR hubs combine
RMON-based management with the
most advanced physical layer support
in an affordable, expandable platform
for mission-critical Token Ring
networks.
The hubs provide an array of
Token Ring features unmatched in
the industry—including advanced
Zero Delay Lockout and Distributed
Recovery Intelligence error recovery
and fault isolation technologies,
Phase-Locked Loop retiming mech-
anisms, and sophisticated SNMP
RMON network management.
For connectivity in a central wiring
closet, cascade connectors can link up
to 20 hubs in one rack—up to 260
users in all. Ring In/Ring Out mod-
ules allow main ring connections to
20 hubs in different locations up to
660 feet (200 meters) apart.
LinkBuilder FMS TR is part of
3Com's innovative SuperStack sys-
tem, allowing you to easily integrate
hubs, bridges, routers, switches, SDLC
conversion devices, and redundant
power into a single, manageable stack.
Hubs
12-Port Hub (3C510500)
Provides 13 RJ-45 twisted-pair ports,
along with two DB-15 cascade connec-
tors and a cascade cable. Hub has slots
for management and RI/RO expansion
modules.
24-Port Hub (3C510501)
Provides 25 RJ-45 twisted-pair ports,
along with two DB-15 cascade connec-
tors and a cascade cable.
18
LinkBuilder Hub Configuration Guide
Modules
RMON Management Agent Module
(3C510502)
User-installable SNMP RMON module
that adds a network analyzer level of
management to the LinkBuilder FMS
TR hubs. Slides into the LinkBuilder
FMS TR 12-port hub only; includes
an RS-232 DB-9 serial port.
Advanced RMON Management Agent
Module (3C510505)
User-installable SNMP RMON
module that supports all ten groups of
the Token Ring RMON specification.
Slides into the LinkBuilder FMS TR
12-port hub only; includes an RS-232
DB-9 serial port.
Fiber RI/RO Module (3C510503)
Slide-in module providing Ring In/Ring
Out expansion to multiple wiring closets.
Module has two pairs of fiber ST con-
nectors and slides into the LinkBuilder
FMS TR 12-port hub only.
LinkBuilder FMS II TR Stack
Copper RI/RO Module (3C510504)
Slide-in module providing Ring In/Ring
Out expansion to multiple wiring closets.
Module has two RJ-45 ports and slides
into the LinkBuilder FMS TR 12-port
hub only.
Copper/Fiber RI/RO Module (3C510506)
Slide-in module providing Ring In/Ring
Out expansion to multiple wiring closets.
Module has one RJ-45 port and one pair
of fiber ST connectors and slides into the
LinkBuilder FMS TR 12-port hub only.
Accessories
Hub Expansion Cascade Cable (spare)
(3C510507)
8-Foot Redundant Ring Cascade Cable
(3C510508)
Power Options
Redundant Power System (3C565047)
Provides two load-sharing bulk power
supplies fed by independent AC lines.
Either of the two supplies can support
up to four LinkBuilder FMS TR hubs
or other units in a SuperStack system.
3C510500
3C510501
3C565047

Advertisement

Table of Contents
loading

This manual is also suitable for:

Linkbuilder fms ii hub

Table of Contents