Table of Contents
Advertisement
Fixed-Port Hubs,
Repeaters, and
Accessories
Fixed-Port Hubs
LinkBuilder TP/8i Hub (3C16181)
Standalone 10BASE-T hub designed
for small remote offices with a require-
ment for SNMP management. Supports
up to eight twisted-pair ports via RJ-45
connections, with an optional, modu-
lar backbone port. Features built-in
SmartAgent management and support
for local bridging using the LinkBuilder
Bridge MicroModule. Backed by a life-
time warranty, the LinkBuilder TP/8i
is a robust entry point for reliable, man-
aged 10BASE-T networking.
LinkBuilder TP/12 Hub (3C16170)
Unmanaged, standalone workgroup hub
providing 12 shielded RJ-45 twisted-pair
connectors, along with a slot for optional
transceiver interface modules for back-
bone connections. The LinkBuilder
Bridge MicroModule (3C16060), which
fits into the transceiver interface slot,
provides unmanaged bridge functionality.
LinkBuilder TP/8 Hub (3C16180)
Unmanaged, standalone workgroup hub
providing eight shielded RJ-45 twisted-
pair connectors, along with a standard
BNC connector for backbone connec-
tions. Eighth port can be used as a
station port or for cascading multiple
hubs on the same segment. Power sup-
plied from external AC power source.
Repeaters
3Com's LinkBuilder repeaters let you
connect coax, twisted-pair, and fiber
cabling in a standard Ethernet network.
A third network segment may be added
using an optional transceiver interface
module. These repeaters offer reliability
based on proven technology, and can be
used in combination with any of 3Com's
Ethernet hubs to provide a complete
LAN solution.
LinkBuilder AUI/BNC Repeater (3C16210)
One AUI, one BNC
LinkBuilder AUI/Fiber Repeater
(3C16505)
One AUI, one pair ST
LinkBuilder AUI/AUI Repeater (3C16200)
Two AUI
Accessories
T
I
M
RANSCEIVER
NTERFACE
ODULES
These modules plug into special slots or
expansion modules in many LinkBuilder
hubs to provide backbone connections
over a variety of media.
AUI Transceiver Interface Module
(3C1206-0)
One female AUI connector
Fan-Out Transceiver Interface Module
(3C1206-4)
One male AUI connector
Fiber-Optic Transceiver Interface
Module (3C1206-5)
One pair of ST connectors
Coaxial Transceiver
Interface Module (3C1206-6)
One BNC connector
TP Transceiver Interface
Module (3C12063)
One RJ-45 connector
ISOLAN T
RANSCEIVERS
ISOLAN transceivers are an inexpen-
sive and flexible way to connect network
segments or integrate a small network
onto a LAN backbone. The TP and fiber
micro transceivers are ideal for direct
connection to AUI ports. The ISOLAN
Fan Out uses AUI connections to allow
up to 64 users to access an Ethernet seg-
ment through a single transceiver.
ISOLAN Transceiver without taps
(3C1114-0)
ISOLAN Transceiver with cable-
piercing tap for thick Ethernet cable
(3C1114-1)
ISOLAN Transceiver with N-series
tap for cable terminated using N-type
connectors (3C1114-2)
ISOLAN Transceiver with BNC tap
for thin Ethernet cable (3C1114-3)
ISOLAN TP Transceiver (3C1681-0)
ISOLAN Fiber-Optic Micro
Transceiver (ST)(3C1680-5)
ISOLAN Diagnostic Fan Out
(3C1131-0)
Mounting Bracket (for ISOLAN
3C114-x transceivers) (3C1191-7)
Universal Mounting Bracket
(for ISOLAN 3C1131-0 and ISOLAN
3C14xx bridges ) (3C1192-0)
Continued on next page
Fiber-Optic and 10BASE-T Transceiver Interface Modules
LinkBuilder Hub Configuration Guide
19
Hide quick links:
Advertisement
Table of Contents
