Replacing Memory Module(S) - Dell Dimension 2010 Service Manual

Replacing Memory Module(s)

1 Follow the procedures in "Before You Begin" on page 11.
2 Press out the securing clip at each end of the memory module connector.
CAUTION:
3 Align the notch on the bottom of the memory module with the tab in the
memory module connector.
1
cutouts (2)
3
notch
CAUTION:
straight down into the connector while you apply equal force to each end of the
memory module.
4 Insert the memory module into the memory module connector until the
memory module snaps into position.
If you insert the memory module correctly, the securing clips snap into the
cutouts at each end of the memory module.
22
Memory Module(s)
Do not install ECC memory modules.
To avoid damage to the memory module, press the memory module
3
2
1
2
tab
4
memory module
4