Before You Begin; Technical Specifications; Recommended Tools; Turning Off Your Computer - Dell Dimension 2010 Service Manual

Service manual
Hide thumbs Also See for Dimension 2010:
Table of Contents

Advertisement

Before You Begin

This manual provides procedures for removing and installing the components
in your computer. Unless otherwise noted, each procedure assumes that the
following conditions exist:
You have performed the steps in "Turning Off Your Computer" on page 11
and "Safety Instructions" on page 12.
You have read the safety information that ships with your computer.
A component can be replaced or—if purchased separately—installed by
performing the removal procedure in reverse order.

Technical Specifications

For information on technical specifications of your computer, see the Setup
Guide that shipped with your computer or see the Dell Support website at
support.dell.com/manuals.

Recommended Tools

The procedures in this document may require the following tools:
Small Phillips screwdriver
Small flat-blade screwdriver

Turning Off Your Computer

CAUTION:
To avoid losing data, save and close all open files and exit all open
programs before you turn off your computer.
1 Shut down the operating system.
Before You Begin
2
11

Advertisement

Table of Contents
loading

Table of Contents