Table of Contents
Advertisement
Boot Device Configuration
Boot Setting Config • Numlock Key—On; Off (On by default)
Removable Device
Priority
Hard Disk Boot
Priority
CD-ROM Boot
Priority
1st Boot Device
2nd Boot Device
3rd Boot Device
Power Management Features
ACPI Suspend Type
Remote Wake Up
Auto Power On
Auto Power On Date
Auto Power On Time
AC Recovery
Load Defaults
Loads the factory default system setup settings.
Set Supervisor Password
Allows you to set a supervisor password of up to eight characters. The supervisor
password allows you to access your computer and to modify the system setup settings.
To disable the supervisor password, leave the Enter Password field blank and press
<Enter>.
• Halt on—All, But Keyboard; All Errors(All, But Keyboard
by default)
Press Enter for details. This is a dynamic list and is
updated based on the removable devices connected to
your computer.
Set the hard drive boot priority, if multiple hard drives
are installed.
Set the optical drive boot priority, if multiple optical
drives are installed.
Removable; Hard Disk; CDROM; Network; Disabled
(Hard Disk by default)
Removable; Hard Disk; CDROM; Network; Disabled
(CDROM by default)
Removable; Hard Disk; CDROM; Network; Disabled
(Removable by default)
S1(POS); S3(STR) (S3(STR) by default)
Disabled; Enabled (Enabled by default)
Disabled; Enabled (Disabled by default)
0
0:00:00
Last Power State; Power On; Power Off (Power Off by
default)
System Setup
73
Advertisement
Table of Contents
