Table of Contents
Advertisement
2 Remove the computer cover from both the sides (see "Removing the Computer
Cover" on page 15).
3 Remove the front bezel (see "Removing the Front Bezel" on page 19).
1
4 Disconnect the FlexBay USB cable from the Media Card Reader connector
on the system board. For the location of the connector, see "System Board
Components" on page 8.
5 Remove the two screws that secure the Media Card Reader to the FlexBay
slot.
34
Drives
FlexBay USB cable
2
screws (2)
2
1
Advertisement
Table of Contents
