Default Value
Configuration File Reference
4.6.4.5 Reorder Tone
Tone Frequencies
Description
Value Range
Default Value
Configuration File Reference
Tone Timings
Description
Value Range
Default Value
Configuration File Reference
4.6.5 Telephone Settings
This screen allows you to configure various telephone settings.
Document Version
2011-06
560,100,100,100,100,100,100,100,100,100,100,100,100,100,100,10
0,100,100,100,100,100,0
DIAL_TONE4_TIMING (Page 187)
Specifies the dual-tone frequencies, in hertz, of reorder tones using 2
whole numbers separated by a comma.
0, 200–2000 (0: No tone)
480,620
REORDER_TONE_FRQ (Page 189)
Specifies the pattern, in milliseconds, of reorder tones using up to 10
whole numbers (off 1, on 1, off 2, on 2...) separated by commas.
Note
•
It is recommended that you set a value of 60 milliseconds or
more for the first value (off 1).
0–16000 (0: Infinite time)
60,250,190
REORDER_TONE_TIMING (Page 189)
4.6.5 Telephone Settings
Administrator Guide
125