Stutter Tone; Tone Frequencies; Tone Timings; Reorder Tone - Panasonic KX-HDV130 Administrator's Manual

4.6.5 Tone Settings
Value Range
Default Value
Configuration File Reference

4.6.5.4 Stutter Tone

Tone Frequencies

Description
Value Range
Default Value
Configuration File Reference

Tone Timings

Description
Value Range
Default Value
Configuration File Reference

4.6.5.5 Reorder Tone

Tone Frequencies
Description
150 Administrator Guide
0–16000 (0: Infinite time)
Note
•
Avoid setting 1–50 for any of the values.
60,1000,3940
RINGBACK_TONE_TIMING (Page 288)
Specifies the dual-tone frequencies, in hertz, of stutter dial tones to
notify that a voice mail is waiting, using 2 whole numbers separated by
a comma.
0, 200–2000 (0: No tone)
Note
•
If the value for this setting is "350,440", the unit will use a mixed
signal of a 350 Hz tone and a 440 Hz tone.
425,0
DIAL_TONE4_FRQ (Page 284)
Specifies the pattern, in milliseconds, of stutter dial tones to notify that
a voice mail is waiting, using up to 22 whole numbers (off 1, on 1, off 2,
on 2...) separated by commas.
Note
•
It is recommended that you set a value of 560 milliseconds or
more for the first value (off 1).
0–16000 (0: Infinite time)
Note
•
Avoid setting 1–50 for any of the values.
60,165,165,165,165,165,165,660,600
DIAL_TONE4_TIMING (Page 285)
Specifies the dual-tone frequencies, in hertz, of reorder tones using 2
whole numbers separated by a comma.
Document Version 2015-12