5.7.2 SIP Settings
SIP_DETECT_SSAF_n
Parameter Name Example
Value Format
Description
Value Range
Default Value
Web User Interface Reference
SIP_CONTACT_ON_ACK_n
Parameter Name Example
Value Format
Description
Value Range
Default Value
SIP_TIMER_B_n
Parameter Name Example
Value Format
Description
Value Range
Default Value
Web User Interface Reference
230
Administrator Guide
SIP_DETECT_SSAF_1, SIP_DETECT_SSAF_2, ...,
SIP_DETECT_SSAF_4
Boolean
Specifies whether to enable SSAF for the SIP servers (registrar server,
proxy server, and presence server).
•
Y (Enable SSAF)
•
N (Disable SSAF)
Note
•
If set to "Y", the unit receives SIP messages only from the
source addresses stored in the SIP servers (registrar server,
proxy server, and presence server), and not from other
addresses. However, if "SIP_OUTPROXY_ADDR_n" in
5.7.2 SIP Settings is specified, the unit also receives SIP
messages from the source address stored in the SIP outbound
proxy server.
N
Enable SSAF (SIP Source Address Filter) (Page 101)
SIP_CONTACT_ON_ACK_1, SIP_CONTACT_ON_ACK_2, ...,
SIP_CONTACT_ON_ACK_4
Boolean
Specifies whether to add the "Contact" header to SIP ACK message.
•
Y (Add the "Contact" header)
•
N (Do not add the "Contact" header)
N
SIP_TIMER_B_1, SIP_TIMER_B_2, ..., SIP_TIMER_B_4
Integer
Specifies the value of SIP timer B (INVITE transaction timeout timer),
in milliseconds. For details, refer to RFC 3261.
250–64000
32000
Timer B (Page 98)
Document Version
2011-06