Description
Value Range
Default Value
Web User Interface Reference
RTCP_ENABLE_n
Parameter Name Example
Value Format
Description
Value Range
Default Value
Web User Interface Reference
RTCP_SEND_BY_SDP_n
Parameter Name Example
Value Format
Description
Value Range
Default Value
RTP_CLOSE_ENABLE_n
Parameter Name Example
Value Format
Description
Document Version
2011-06
Specifies the interval, in milliseconds, between transmissions of RTP
packets.
•
20
•
30
•
40
20
RTP Packet Time (Page 102)
RTCP_ENABLE_1, RTCP_ENABLE_2, ..., RTCP_ENABLE_4
Boolean
Selects whether to enable or disable RTCP (Real-Time Transport
Control Protocol). For details, refer to RFC 3550.
•
Y (Enable RTCP)
•
N (Disable RTCP)
N
RTCP Enable (Page 104)
RTCP_SEND_BY_SDP_1, RTCP_SEND_BY_SDP_2, ...,
RTCP_SEND_BY_SDP_4
Integer
Specifies whether to send RTCP signals by SDP (Session Description
Protocol).
0–1
–
0: Send RTCP signals using the value specified in
RTCP_INTVL_n.
–
1: Send RTCP signals using the value specified in the SDP attribute
"a=rtcp:".
0
RTP_CLOSE_ENABLE_1, RTP_CLOSE_ENABLE_2, ...,
RTP_CLOSE_ENABLE_4
Boolean
Specifies whether to enable processing to close held RTP sockets.
5.6.2 RTP Settings
Administrator Guide
205