Front Panel Led Indicators - HP DL360 - ProLiant - G3 Setup And Installation Manual

LEDs, Switches, and Jumpers

Front Panel LED Indicators

The set of six LEDs on the front of the server indicates server status. The following
figure and table identify and describe the location and function of the LEDs.
Figure E-1: Identifying the front panel LED indicators
Table E-1: Identifying the Front Panel LED Indicators
Location LED
1 Unit Identification
LED/button
2 Internal health LED
3 External health LED
(power supply)
E-2
Status
Blue = Activated
Blinking = System remotely managed
Off = Deactivated
Red = System critical. Refer to system board LEDs to
identify component in critical state.
Amber = System degraded. Refer to system board LEDs to
identify component in degraded state.
Green = Normal
Amber = Power redundancy failure
Green = Normal
HP ProLiant DL360 Generation 3 Server Setup and Installation Guide
continued