HP DL360 - ProLiant - G3 Setup And Installation Manual page 86

5. Be sure that a normal power-up sequence has occurred to confirm that the system
meets the minimal hardware requirements and is powered up under normal
operation. The system has powered up successfully if:
a. The front panel Power On/Standby LED illuminates green.
b. The fans start up.
c. The monitor displays messages regarding server initialization in the
following sequence:
Video initialization—The initialization screen is displayed.
Processor initialization
Memory test
Memory initialization
Diskette drive
SCSI devices (if applicable)
Option ROM
d. The operating system loads to complete the boot process.
If the problem persists, continue with the section, "Diagnosis Steps," in
this appendix.
HP ProLiant DL360 Generation 3 Server Setup and Installation Guide
Troubleshooting
D-3