Re-Recording (Video/Audio Dubbing) - Panasonic OmniMovie PV-S445 Operating Instructions Manual

RE-RECORDING (VIDEO/AUDIO DUBBING)
PV-S445
It is simple to dub tapes using two S-VHS Movies or another VCR for playing or recording as described below.
CAUTION: Unauthorized exchanging and/or copying of copyrighted recordings may be copyright infringement.
CONNECTIONS
• SET UP AND CONNECT THE S-VHS MOVIES AS ILLUSTRATED.
Playing S-VHS Movie
Adaptor
Connector
AudioNideo
Cable
(supplied)
Connector
(Be sure to connect the AC Power Plug of the AC Adaptor to an AC Outlet.)
PREPARATIONS
• Turn ON both S-VHS Movies.
• On the recording S-VHS Movie set the S-VHS SELECTOR to "ON".
• Set the AC Adaptor's Input Signal Selector for Recording S-VHS Movie to LINE.
• Place the VCR/CAMERA Selector Slide in the "VCR" position on both S-VHS Movies.
OPERATION
1 . Set up one Movie for playback.
2. Set up the other Movie for recording .
3. Press the PLAY Button on thljl playing Movie.
4. Press the RECORD Button
a~d
the PLAY Button together on the recording Movie.
• Be sure steps 3 and 4 are done simultaneously to avoid missing any of the recording.
TO MONITOR THE RE-RECORDING PROCESS ON YOUR TV
• Turn TV ON.
• Set the VIDEO INPUT SELECTOR on the TV to S-VIDEO position * .
NOTE:
S-Video In
S-Video Output
Connector
* When the TV you are using is non S-VHS TV, connect the Adaptor Connector of S-VHS Movie and your TV
through the AC Adaptor. See page 31 for details.
-36-
- -