Panasonic OmniMovie PV-S445 Operating Instructions Manual page 25

AUTO WHITE BALANCE
~o:-
l
REMOTE CONTROL (SUPPLIED)
EASY EDITING
PV-S445
With the WHITE BALANCE Switch, select "AUTO" for continuous color
balance in both indoor and outdoor lighting situations. Under the following
conditions set the WHITE BALANCE Switch to
"-:¢:-"
or
"Q "
as
recommended, for better color reproduction .
OUTDOOR " ·:¢:·" : When record ing an outdoor scene from indoors, or
recording an outside scene using an amber filter.
INDOOR "
Q ":
When recording an indoor scene from outside, or an
inside scene using a blue filter.
This control allows you to record from a remote position without
disturbing your Movie or the subject.
RECORDING INDICATOR-- This indicator lights when your Movie
is in REC mode.
REMOTE PAUSE BUTTON-- Pressing this button starts a recording
when your Movie is in Record/Pause mode. When you press it again,
it resets your Movie to Record/Pause mode.
To obtain proper continuity when taping from Stop mode, or after charging the Battery Pack:
1. Rewind the tape for a short distance (about 5 digits on the Tape Counter) by pressing the REWIND Button.
Then press the PLAY Button and view the picture on the viewfinder.
2. At the location where you wish to continue recording , press the PAUSE/STILL Button.
Continue recording as described in A or B.
A. For CAMERA recording, place the VCR/CAMERA Selector Slide in the "CAMERA" position; your Movie will
go into Record/Pause mode. Then press the RECORD/PAUSE Button to continue recording.
B. For VCR recording , press
th~
RECORD Button and the PLAY Button together and then press the PAUSE/
STILL Button again. Your Movie will begin recording .
-24-