Chapter 3: Hardware Installations And Upgrades; Before You Begin; Tools And Supplies Needed; Installing And Removing Memory - Intel S5000VCL - Server Board Motherboard User Manual

3
Hardware Installations and
Upgrades

Before You Begin

Before working with your server product, pay close attention to the
at the beginning of this manual.

Tools and Supplies Needed

•
Phillips* (cross head) screwdriver (#1 bit and #2 bit)
•
Needle nosed pliers
• Antistatic wrist strap and conductive foam pad (recommended)

Installing and Removing Memory

The silk-screen on the board for the FBDIMMs displays DIMM B3, DIMM B2, DIMM
B1, DIMM A3, DIMM A2, and DIMM A1, starting from the edge of the board. See
"Memory" for a discussion of the memory requirements and options. See
Information and Software"
Note: DIMM notch and socket bump must align. DDR2 DIMMS cannot be inserted in FBDIMM
sockets.
for a link to the list of tested DIMMs.
"Safety Information"
"Additional