External Rj45 Serial Port Jumper Block; Figure 19. External Rj45 Serial Port Configuration Jumper - Intel S5000PSLSATAR - Inte Dual LGA771 Specification

®
Intel Server Board S5000PAL / S5000XAL TPS Jumper Block Settings
6.3

External RJ45 Serial Port Jumper Block

The jumper block J8A3, located directly behind the external RJ45 serial port, is used to configure either a
DSR or a DCD signal to the connector.
J8A3
2
3 4
1-2: DCD to DTR 3-4: DSR to DTR
(factory default)
TP02303

Figure 19. External RJ45 Serial Port Configuration Jumper

Revision 1.9 63
Intel order number: D31979-010