Network Interface; Table 12. External Rj45 Nic Port Led Definition - Intel S2600CP Family Technical Product Specification

Hide thumbs Also See for S2600CP Family:
Table of Contents

Advertisement

Intel® Server Board S2600CP Functional Architecture
4.5.3.2
Integrated BMC Embedded LAN Channel
The Integrated BMC hardware includes two dedicated 10/100 network interfaces. These
interfaces are not shared with the host system. At any time, only one dedicated interface may
be enabled for management traffic. The default active interface is the NIC 1 port.
For these channels, support can be enabled for IPMI-over-LAN and DHCP. For security reasons,
embedded LAN channels have the following default settings:
IP Address: Static.
All users disabled.
For a functional overview of the baseboard management features, refer to Chapter 5 – Platform
Management Overview.
4.6

Network Interface

®
The Intel
Server Board S2600CP has a Intel
Controller providing up to four 10/100/1000 Mb Ethernet ports. The controller is a fully integrated
MAC/PHY in a single low power package that supports quad-port and dual-port Gb Ethernet
designs. The device offers up to four fully integrated GbE media access control (MAC), physical
layer (PHY) ports, and up to four SGMII/SerDes ports that can be connected to an external PHY.
The controller supports PCI Express* PCIe v2.0 (5GT/s and 2.5GT/s). The controller enables
four-port or two-port 1000BASE-T implementations using integrated PHY's. The controller
supports VMDq, SR-IOV, EEE, and DMA Coalescing.
Each Ethernet port drives two LEDs located on each network interface connector. The LED at
the right of the connector is the link/activity LED and indicates network connection when on, and
transmit/receive activity when blinking. The LED at the left of the connector indicates link speed
as defined in the following table.
LED Color
Green/Amber (Right)
Green (Left)
50

Table 12. External RJ45 NIC Port LED Definition

LED State
Off
Amber
Green
On
Blinking
Intel order number G26942-003
Intel
Server Board S2600CP and Server System P4000CP TPS
®
®
Ethernet Controller I350 ("Powerville") GbE
10 Mbps
100 Mbps
1000 Mbps
Active Connection
Transmit/Receive activity
NIC State
Revision 1.1

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

P4000cp familyS2600cp seriesP4000cp series

Table of Contents