Absolute Maximum Ratings; Mean Time Between Failures (Mtbf) Test Results; Calculated Mean Time Between Failures (Mtbf); Table 64. Absolute Maximum Ratings - Intel S3210SHLX - Entry Server Board Motherboard Specification

Intel® Server Boards S3200SH/S3210SH TPS
7.

Absolute Maximum Ratings

Operating the server board at conditions beyond those shown in the following table may cause
permanent damage to the system. The table is provided for stress testing purposes only.
Exposure to absolute maximum rating conditions for extended periods may affect system
reliability.
Operating Temperature
Storage Temperature
Voltage on any signal with respect to ground
3.3 V Supply Voltage with Respect to ground
5 V Supply Voltage with Respect to ground
Notes:
1. Chassis design must provide proper airflow to avoid exceeding the processor maximum
case temperature.
2. VDD is the supply voltage for the device.
7.1

Mean Time Between Failures (MTBF) Test Results

This section provides results of MTBF testing done by a third party testing facility. MTBF is a
standard measure for the reliability and performance of the board under extreme working
conditions. The MTBF was measured at TBD hours at 35 degrees C.
7.2

Calculated Mean Time Between Failures (MTBF)

The MTBF (Mean Time Between Failures) for the server boards as configured from the factory
is shown in the table below.
Product Code
®
Intel Server Board S3200SH-L
®
Intel Server Board S3200SH-V
®
Intel Server Board S3210SH-LX
®
Intel Server Board S3210SH-LC
94

Table 64. Absolute Maximum Ratings

Table 65. MTBF Data

Calculated MTBF
282569 Hours
111326 Hours
265866 Hours
104745 Hours
Absolute Maximum Ratings
1
5 °C to 50 °C
-55 °C to +150 °C
2
-0.3 V to Vdd + 0.3V
-0.3 V to 3.63 V
-0.3 V to 5.5 V
Operating Temperature
35 degrees C
55 degrees C
35 degrees C
55 degrees C
Revision 1.3