Intel Desktop Board D845PEBT2 Technical Product Specification
2.10 Mechanical Considerations
2.10.1 D845PEBT2 Form Factor
The Desktop Board D845PEBT2 is designed to fit into an ATX-form-factor chassis. The board
dimensions depend on the board version, as shown in the table below. The location of the board's
AA number is shown in the Figure 12 on page 57.
Table 54.
Board Dimensions
A Board with
This AA Number
(where xxx is
any number)
A99697-xxx
C10867-xxx
C12587-xxx
In the figures, dimensions are given in inches [millimeters]. Location of the I/O connectors and
mounting holes are in compliance with the ATX specification (see Section 1.4).
6.50
[165.10]
6.10
[154.94]
0.00
1.70
[43.18]
5.55
[140.97]
[124.46]
74
Or These Included Manufacturing
Options
2-channel audio subsystem
• 6-channel audio subsystem
• IEEE 1394a-2000 subsystem
• 6-channel audio subsystem
• (No IEEE 1394a-2000
subsystem)
4.90
2.60
[66.04]
1.80
[45.72]
Figure 18. 12" x 8.2" Desktop Board Dimensions
Has These Board Dimensions
in Inches [Millimeters]
12" x 8.2"
[304.80 mm x 208.28 mm]
12" x 8.5"
[304.80 mm x 215.90 mm]
12" x 8.5"
[304.80 mm x 215.90 mm]
0.00
As Shown in
Figure 18
Figure 19
Figure 19
5.20
[132.08]
6.45
[163.83]
6.20
[157.48]
OM15036