Overview; Feature Summary - Intel D845PEBT2 Specification

Intel Desktop Board D845PEBT2 Technical Product Specification

1.1 Overview

1.1.1 Feature Summary

Table 1 summarizes the major features of the Intel
Table 1.

Feature Summary

Form Factor
Processor
Memory
Chipset
Video
Audio
USB
Serial ATA (SATA)
or
IDE RAID
Peripheral
Interfaces
Expansion
Capabilities
I/O Control
LAN
12
ATX (Depending on the board version, dimensions are 12.00 inches by 8.20
inches, or 12.00 inches by 8.50 inches. See Table 54 on page 74.)
• Support for an Intel
®
Pentium
400/533 MHz system bus
• Support for an Intel
®
Celeron
system bus
• Two 184-pin DDR SDRAM Dual Inline Memory Module (DIMM) sockets
• Support for DDR 333 and DDR 266
• Support for up to 2 GB of system memory
NOTE: The Desktop Board has been designed to support DIMMs based on
512 Mbit technology for a maximum onboard capacity of up to 2 GB, but
this technology has not been validated on this board. For the latest
memory information, please refer to the following Intel web site:
http://developer.intel.com/design/motherbd/bt2/bt2_mem.htm
®
Intel 845PE Chipset, consisting of:
• Intel
®
82845PE Memory Controller Hub (MCH)
• Intel
®
82801DB I/O Controller Hub (ICH4)
• Intel
®
82802AB (4 Mbit) Firmware Hub (FWH)
AGP connector supporting 1.5 V 4X AGP cards
See Manufacturing Options on page 13
Support for USB 2.0 devices
See Manufacturing Options on page 13
• Up to six USB ports
• One serial port
• One parallel port
• Two IDE interfaces with UDMA 33, ATA-66/100 support
• One diskette drive interface
• PS/2
†
keyboard and mouse ports
• Three fan connectors
Five PCI bus add-in card connectors. Depending on the board version, SMBus is
routed to PCI bus connector 1 or 2. See Table 29 on page 57.
SMSC LPC47M172 LPC Bus I/O controller
®
Intel 82562ET 10/100 Mbits/sec Platform LAN Connect (PLC) device
®
Desktop Board D845PEBT2.
®
4 processor in a mPGA478 socket with a
®
processor in a mPGA478 socket with a 400 MHz
continued