Creating A Mirrored Set (Raid 1); Automatic Configuration - Intel D845PEBT2 Product Manual

Intel Desktop Board D845PEBT2 Product Guide
6. After confirming the Striped set, a summary of the Striped set will be displayed similar to the
following screen image:
RAID Configuration Utility - Silicon Image Inc. Copyright © 2002
Create RAID set
Delete RAID set
Rebuild Mirrored set
Resolve Conflicts
*0 PM Manufacturer Model
1 SM Manufacturer Model
*Set0 SiI Striped Set PM
0 Manufacturer Model chunk size XXK
1 Manufacturer Model chunk size XXK
7. Press <Ctrl-E> to exit the RAID Configuration Utility.
8. Press <Y> to confirm exit and proceed with operating system setup.

Creating a Mirrored Set (RAID 1)

Automatic Configuration

To automatically configure a mirrored set, highlight the Auto Configuration option using the
up-down arrow keys and press <Enter>.
✏
NOTE
The Auto Configuration option will assign the drive "0" (drive on the primary SATA channel) as
the source drive and drive "1" (drive on the secondary SATA channel) as the target drive. If you
wish to select the drive assignments for the source and target drives, choose the Manual
Configuration option.
42
Press <Enter> to create RAID
set
XXXXXMB
XXXXXMB
XXXXXXMB
ESC
Enter
Ctrl-E
*
Previous Menu
Select
Exit
First HDD