Table 17.
Primary/Secondary IDE Master/Slave Submenus (continued)
Feature
Options
• Auto (default)
DMA Mode
• SWDMA 0
• SWDMA 1
• SWDMA 2
• MWDMA 0
• MWDMA 1
• MWDMA 2
• UDMA 0
• UDMA 1
• UDMA 2
• UDMA 3
• UDMA 4
• UDMA 5
(Note)
Cable Detected
None
Note: These configuration options appear only if an IDE device is installed.
Using the BIOS Setup Program
Description
Specifies the Ultra DMA mode for the drive.
Displays the type of cable connected to the IDE
interface: 40-conductor or 80-conductor (for
ATA-66/100 devices).
65