Desktop Board Features; Feature Summary - Intel D845PEBT2 Product Manual

1 Desktop Board Features

Table 1 describes the major features of Intel
Table 1.

Feature Summary

Form Factor
Processor
Memory
Chipset
I/O Control
Audio
LAN
Expansion
Capabilities
ATX at 12.0 inches by 8.5 inches
Support for:
• Intel
® ®
Pentium 4 processor in an mPGA-478 socket with 533/400 MHz front side
bus (FSB)
• Intel ® ®
Celeron processor in an mPGA-478 socket with 400 MHz FSB
• Two 184-pin Double Data Rate (DDR) SDRAM Dual Inline Memory Modules (DIMMs)
with gold-plated contacts
• Support for DDR266 and DDR333 (see page 13 for details)
• Unbuffered and non-registered single or double-sided DIMMs
• Serial Presence Detect (SPD) memory only
• Non-ECC RAM (ECC memory will run in non-ECC mode)
• 2.5 V memory
• Support for up to 2 GB system memory
Desktop Board D845PEBT2 has been designed to support DIMMs based on 512 Mbit
NOTE:
technology up to 2 GB, but this technology has not been validated on this Intel desktop
board. For more information about the latest list of tested memory, refer to the Intel
World Wide Web site at:
http://support.intel.com/support/motherboards/desktop/
®
Intel 845PE chipset, consisting of:
• Intel
®
82845PE Memory Controller Hub (MCH) with Accelerated Hub Architecture
(AHA) bus
• Intel
®
82801DB I/O Controller Hub (ICH4) with support for up to six Hi-Speed
Universal Serial Bus 2.0 (USB 2.0) ports
• 4 Mbit Firmware Hub (FWH)
Support for SMSC LPC47M172 super I/O controller
• Intel 845PE chipset (AC '97)
• Analog Devices Inc. audio codec
• SoundMAX
† †
Cadenza
®
Intel 82562ET 10/100 Mbit/sec Platform LAN Connect (PLC) device and
RJ-45 connector
• Five PCI bus add-in card connectors
• One AGP connector
®
Desktop Board D845PEBT2.
continued
9