Pci Device, Slot 8 Submenu; Hot-Plug Pci Control Submenu; Integrated Peripheral Configuration Submenu - Intel SKA4 Product Manual

PCI Device, Slot 8
Table 22.

PCI Device, Slot 8 Submenu

Feature
Option ROM Scan
Enable Master
Latency Timer

Hot-Plug PCI Control Submenu

Table 23. Hot-Plug PCI Control Submenu
Feature
Hot-Plug PCI BIOS
Support
Resource Padding
Level
Empty Bus Default
Speed

Integrated Peripheral Configuration Submenu

Table 24. Integrated Peripheral Configuration Submenu
Feature
COM1:
Base I/O Address
Interrupt
COM2:
Configuration Software and Utilities
Choices Description
Enabled Initializes device expansion ROM.
Disabled
Enabled Enables the selected device as a PCI bus master.
Disabled
Default Minimum guaranteed time, in units of PCI bus clocks, that a
020h device can be master on a PCI bus. Typically, option ROM
040h code overwrites the value set by the BIOS.
060h
080h
0A0h
0C0h
0E0h
Choices Description
Enabled If enabled, the system uses resource padding and the Hot-
Disabled Plug resource table.
Disabled Determines amount of resources used by each Hot-Plug
Minimum
PCI slot.
Maximum
33 MHtz Unoccupied bus default speed.
66 MHtz
Choices Description
Disabled If set to "Auto", BIOS configures the port.
Enabled If set to "OS Controlled", the OS configures the port.
Auto
OS Controlled
3F8h Selects the base I/O address for COM port A.
2F8h
3E8h
2E8h
IRQ 4 Selects the IRQ for COM port A.
IRQ 3
Disabled If set to "Auto", BIOS configures the port.
Enabled
If set to "OS Controlled", the OS configures the port.
Auto
OS Controlled
continued
37