Reset The Roller Count In The User Utility; Cleaning The Scanner Glass And Background Plates - Xerox DocuMate 4790 User Manual

Note: Be careful when cleaning the rollers. All of the rollers, except the free rollers, are designed to
rotate in one direction only. Do NOT force the roller to rotate in the opposite direction. Forcing the
roller to rotate will damage it, and cause the scanner to feed pages incorrectly.

Reset the Roller Count in the User Utility

After cleaning the scanner you need to reset the roller count in the User Utility.
1. Open the User Utility application.
2. From the main screen click on Clear Counter next to the field After Clean Roller.
3. The clean roller count will now be reset to 0.
4. Close the User Utility.

Cleaning the Scanner Glass and Background Plates

1. Pull on the scanner cover release and lift the lid to open the scanner.
2. The following illustration shows the location of the glass and background plates in the top and
bottom of the scanner. The background plates are rollers that you can rotate to change from black
to white. While cleaning the background plates, rotate the bars to clean the entire surface.
Xerox DocuMate 4790
User's Guide
185