User Utility; Main Screen Options - Xerox DocuMate 4790 User Manual

User Utility

The User Utility is a software program designed to help maintain and troubleshoot your Xerox scanner.
On installation you were prompted to place an icon on your Windows desktop. If you selected yes,
simply double-click on the user utility icon to open the software.
If you do not have the User Utility icon on your desktop, follow these instructions for opening the utility
from the Windows programs list:
1. Click on the start button on the Windows taskbar.
2. Click on All Programs.
3. Click on Xerox from the programs list.
4. Select User Utility to open the software.
If you are prompted to select a scanner, make sure your scanner is selected then click on OK.

Main Screen Options

This section briefly describes the options on the main interface of the User Utility. The following
sections contain detailed instructions on using some of the options in this utility.
Scanner Status—this area displays the status of the scanner connected as well as error code details.
Error Code—this field displays an error code number to help you diagnosis and resolve hardware
errors. Please see Scanner Error Codes
the issue.
Scanner Information—this area displays the current hardware specifications of the scanner.
• Model: the scanner hardware model.
• Firmware Version: the scanner's current firmware version.
• Memory: the amount of memory currently installed on the scanner.
• Interface: the connection interface to the computer.
• Imprinter: indicates if an imprinter is installed in the scanner, with a status of either Enable or
Disable, and the type of imprinter installed. The imprinter is an optional accessory that you can
purchase for the scanner. Please refer to our website www.xeroxscanners.com for spare part
options available for your scanner.
Scanner Condition—the options in this section relate to software settings and maintenance for the
scanner.
174 Xerox DocuMate 4790
User's Guide
on page 175 for the full list of error codes and steps to resolve