Changing Parallel Interface Menu Settings - Oki OKIPAGE24DX User Manual

SETTING
0 (Range -2 to +2 in increments of 1)
Notes: Adjust to improve print quality:
-2=Rough/thick papers and/or low temperature/humidity
–1
0=Normal media/environmental conditions
+1
+2=Rough papers and/or high temperature/humidity
CLN CYCL
NORMAL
MIDDLE
HIGH
Notes: Sets the frequency of the page cleaning sequence:
NORMAL = every 24 pages (OKIPAGE 24DX) or every 20
pages (OKIPAGE 18)
MIDDLE = every 10 pages
HIGH = every 3 pages.
|
E-112 OKIPAGE 18/24DX
Changing Parallel Interface Menu
Settings
If you need to change any of the menu settings:
1 Press ON LINE.
The printer goes off line.
2 Press and hold MENU 1/Menu 2 until you see PRINT
MODE on the display.
3 Press MENU 1/Menu 2 until PARALLEL I/F appears.
4 Press ENTER.
5 Press MENU 1/Menu 2 until the item you wish to change
appears (e.g., I-PRIME).
6 Press /RESET until the setting you wish to engage
appears (e.g., ON).
7 Press ENTER.
An asterisk appears to indicate the new default setting
(e.g., ON *).
8 Press ON LINE.
The printer saves the new setting and exits the menu.