Oki OKIPAGE24DX User Manual page 110

RECEIVE BUFFER
AUTO
8KB
20KB
50KB
100KB
1MB
Notes: Sets the size of the receive buffer. If you set a large
value, the printing speed will be faster, but memory overflows
will occur more frequently.
When this value is changed, all downloaded fonts, macros,
and I/O data are lost.
ECP
ENABLE
DISABLE
Note: Enables or disables ECP mode in the parallel
interface.
|
E-110 OKIPAGE 18/24DX
OP MENU
ENABLE
DISABLE
Notes: DISABLE = Disables all control panel buttons
except ON LINE. Use this feature to prevent
changing menu items you have personally
selected.
ENABLE = All control panel buttons are
active. See Recovery Procedure below.
Recovery Procedure: To enable the operator panel after it
has been disabled:
1 Turn off the printer.
2 Follow instructions at beginning
of this section to enter the User
Maintenance Menu.
3 Under the OP MENU category,
select ENABLE.
X ADJUST
0mm (Range +2.00 to -2.00 mm, in 0.25 mm intervals)
Notes: Adjust horizontal print position in 0.25 mm
increments. Plus (+) indicates right
movement, minus (-) indicates left
movement.