Changing the Media Type in the Printer Driver
The printer is optimized for printing on 20-lb. (75 g/m
If you consistently use much lighter or heavier paper in Tray 1 (or Tray 2 if
installed), or transparencies in the manual feed tray, you must change the Media
setting to match what you are using.
You can do this:
1. In your software application by clicking on the Properties button in the
Print dialog box.
2. In the printer driver.
3. In the printer menu.
Note: Changes made in the printer driver will be overridden by your software
settings.
To change Media Type in the printer driver:
For the PCL 6e driver:
1. From the Windows Taskbar, click Start
2. Double-click the OKIPAGE 14 icon.
3. Click Printers
4. In the Paper Thickness drop-down list box, select the setting you want.
5. Click OK.
For the PostScript (14i) driver:
1. From the Windows Taskbar, click Start
2. Double-click the OKIPAGE 14 icon.
3. Click Printers
4. Click the Advanced tab.
5. Click on Media <Printer Setting>.
6. In the Media Setting list box, select the setting you want.
Document Defaults.
Document Defaults.
2
) paper.
Settings
Printers.
Settings
Printers.
15