seTTinGs
sleeP MoDe
It is possible to deactivate the sleep mode.
Välj MenU > seTTinGs > sleeP MoDe.
Select sleep mode to be enableD or DisableD and confirm by pressing oK.
sofTWaRe
Upgrading
This menu option restarts the Konftel 300M in upgrade mode. See page 27.
Resetting
There is a menu option under SETTINGS that resets all settings to default. Please note
that this also deletes all contacts in the phonebook and all groups saved in the confer-
ence guide.
Select MenU > seTTinGs > sofTWaRe > facToRy ReseT.
Confirm that you really want to reset the settings to default by pressing oK again, or
cancel the resetting procedure by pressing c.
checKinG sTaTUs
If you need to check the software version or serial number.
Select MenU > sTaTUs.
seT call foRWaRDinG
Call forwarding is a service set up by the provider and is linked to the SIM card, not the
phone. You can check the current setting and change it from Konftel 300M by entering
a code according to the table below. Contact your service provider for more information.
Forward service
All calls
If busy
If not answered
If out of reach
26
Activate
*
*
21
[phone number]#
*
*
67
[phone number]#
*
*
61
[phone number]#
*
*
62
[phone number]#
Cancel
Check status
*
#21#
#21#
*
#67#
#67#
*
#61#
#61#
*
#62#
#62#